Engineered Early Entry Diamond Saw Blades & Skid Plates
Cut contraction joints cleanly within the critical 1 to 4 hour window after finishing, before uncontrolled slab micro-cracking initiates.
Early entry cutting into green concrete presents distinct mechanical demands. Concrete in its plastic-to-curing phase is tender and chemically abrasive: aggregate is not yet fully bound by hydration, while loose silica slurry accelerates blade undercut and core erosion. Diamond Vantage manufactures early entry saw blades using Zenesis™ patterned diamond technology and application-matched metal matrices to prevent edge chipping, spalling, and joint raveling on high-spec commercial slabs, warehouse floors, and highway pavements.
Color-Coded Bond Selection by Aggregate Hardness
For early entry cutting, bond choice is dictated primarily by the Mohs hardness of the local coarse aggregate. Using the correct bond prevents segment glazing on hard stone and stops premature wear on abrasive sands.
Ultra-Hard Aggregate
Engineered for dense flint, river gravel, quartzite, and chert. Soft bond release keeps sharp diamonds continuously exposed.
Medium to Hard Aggregate
Tuned for hard chert, traprock, hard granite, and dense basalt where balanced speed and segment lifespan are required.
Medium Aggregate
Versatile medium bond matrix formulated for quartz, crushed stone, granitic gravel, and standard regional concrete mixes.
Abrasive Aggregate
Hard, abrasion-resistant bond designed for soft granite, limestone, abrasive sand, dolomite, and high-wear green matrices.
Zenesis™ Z100 Purple Blade
- Engineered specifically for the hardest concrete aggregates including flint, river gravel, chert, and high-psi silica mixtures.
- Proprietary Zenesis™ patterned diamond distribution ensures uniform diamond exposure, eliminating segment glaze under heavy loads.
- Ultra-soft matrix bond ensures free cutting with zero micro-fracturing along joint edges.
| Part Number | Size (Diameter x Kerf x Arbor) | List Price (USD) |
|---|---|---|
| 0508EZ100Z | 5" × .080" × EZ | $204.92 |
| 5508EZ100Z | 5.5" × .080" × EZ | $231.71 |
| 0609EZ100Z | 6" × .095" × EZ | $297.34 |
| 0622EZ100Z | 6" × .225" × EZ | $593.34 |
| 6509EZ100Z | 6.5" × .095" × EZ | $340.95 |
| 0809EZ100Z | 8" × .095" × EZ | $393.78 |
| 0822EZ100Z | 8" × .225" × EZ | $808.99 |
| 1009CZ100Z | 10" × .095" × 7/8" | $533.83 |
| 1009EZ100Z | 10" × .095" × EZ | $534.95 |
| 1025EZ100Z | 10" × .250" × EZ | $1,066.14 |
| 1208EZ100Z-HUB | 12" × .080" × EZ + Hub | $924.14 |
| 1212EZ100Z | 12" × .125" × EZ | $772.82 |
| 1218EZ100Z | 12" × .187" × EZ | $919.06 |
| 1225EZ100Z | 12" × .250" × EZ | $1,339.38 |
| 1312EZ100Z | 13.5" × .125" × EZ | $882.64 |
| 1318EZ100Z | 13.5" × .187" × EZ | $1,156.11 |
| 1325EZ100Z | 13.5" × .250" × EZ | $1,473.33 |
| 1412EZ100Z | 14" × .125" × EZ | $882.64 |
| 1425EZ100Z | 14" × .250" × EZ | $1,473.33 |
Zenesis™ Z200 Green Blade
- Formulated for commercial contractors working with medium to hard aggregate types such as traprock, river stone, and hard granite.
- Optimal bond wear rate balances high cut velocity with exceptional footage yield.
- Precision laser-welded undercut protection safeguards core integrity during continuous joint tracking.
| Part Number | Size (Diameter x Kerf x Arbor) | List Price (USD) |
|---|---|---|
| 0508EZ200Z | 5" × .080" × EZ | $204.92 |
| 5508EZ200Z | 5.5" × .080" × EZ | $231.71 |
| 0609EZ200Z | 6" × .095" × EZ | $297.34 |
| 0622EZ200Z | 6" × .225" × EZ | $593.34 |
| 6509EZ200Z | 6.5" × .095" × EZ | $340.95 |
| 0809EZ200Z | 8" × .095" × EZ | $393.78 |
| 0809CZ200Z | 8" × .095" × 7/8" | $393.78 |
| 0822EZ200Z | 8" × .225" × EZ | $808.99 |
| 1009EZ200Z | 10" × .095" × EZ | $534.95 |
| 1025EZ200Z | 10" × .250" × EZ | $1,066.14 |
| 1212EZ200Z | 12" × .125" × EZ | $772.82 |
| 1225EZ200Z | 12" × .250" × EZ | $1,339.38 |
| 1312EZ200Z | 13.5" × .125" × EZ | $882.64 |
| 1318EZ200Z | 13.5" × .187" × EZ | $1,156.11 |
| 1325EZ200Z | 13.5" × .250" × EZ | $1,473.33 |
| 1412EZ200Z | 14" × .125" × EZ | $882.64 |
| 1425EZ200Z | 14" × .250" × EZ | $1,473.33 |
Zenesis™ Z350 Orange Blade
- High-production blade engineered for regional ready-mix concrete with quartz, crushed river stone, and medium trap aggregates.
- Versatile dual-action performance suited for general industrial warehouse slab relief sawing.
- Guarantees low vibration, clean saw-cut channels, and minimal blade deflection.
| Part Number | Size (Diameter x Kerf x Arbor) | List Price (USD) |
|---|---|---|
| 0508EZ350Z | 5" × .080" × EZ | $204.92 |
| 5508EZ350Z | 5.5" × .080" × EZ | $231.71 |
| 0609EZ350Z | 6" × .095" × EZ | $297.34 |
| 0622EZ350Z | 6" × .220" × EZ | $593.34 |
| 6509EZ350Z | 6.5" × .095" × EZ | $340.95 |
| 0809EZ350Z | 8" × .095" × EZ | $393.78 |
| 0809CZ350Z | 8" × .095" × 7/8" | $393.78 |
| 0822EZ350Z | 8" × .220" × EZ | $808.99 |
| 1009EZ350Z | 10" × .095" × EZ | $534.95 |
| 1025EZ350Z | 10" × .250" × EZ | $1,066.14 |
| 1212EZ350Z | 12" × .125" × EZ | $772.82 |
| 1218EZ350Z | 12" × .125" × EZ | $919.06 |
| 1225EZ350Z | 12" × .250" × EZ | $1,339.38 |
| 1312EZ350Z | 13.5" × .125" × EZ | $882.64 |
| 1318EZ350Z | 13.5" × .187" × EZ | $1,156.11 |
| 1325EZ350Z | 13.5" × .250" × EZ | $1,473.33 |
| 1412EZ350Z | 14" × .125" × EZ | $882.64 |
| 1425EZ350Z | 14" × .250" × EZ | $1,473.33 |
Zenesis™ Z550 Yellow Blade
- Specifically engineered with an abrasion-resistant hard matrix to resist scouring from abrasive sands and soft limestone aggregates.
- Protects the core from severe slurry washback that causes early segment loss on conventional soft blades.
- Delivers consistent joint depth control and long tool life in abrasive green slab conditions.
| Part Number | Size (Diameter x Kerf x Arbor) | List Price (USD) |
|---|---|---|
| 0508EZ550Z | 5" × .080" × EZ | $204.92 |
| 5508EZ550Z | 5.5" × .080" × EZ | $231.71 |
| 0609EZ550Z | 6" × .095" × EZ | $297.34 |
| 0622EZ550Z | 6" × .225" × EZ | $593.34 |
| 6509EZ550Z | 6.5" × .095" × EZ | $340.95 |
| 0809EZ550Z | 8" × .095" × EZ | $393.78 |
| 0809CZ550Z | 8" × .095" × 7/8" | $393.78 |
| 0822EZ550Z | 8" × .225" × EZ | $808.99 |
| 1009EZ550Z | 10" × .095" × EZ | $534.95 |
| 1025EZ550Z | 10" × .250" × EZ | $1,066.14 |
| 1212EZ550Z | 12" × .125" × EZ | $772.82 |
| 1218EZ550Z | 12" × .187" × EZ | $919.06 |
| 1225EZ550Z | 12" × .250" × EZ | $1,339.38 |
| 1312EZ550Z | 13.5" × .125" × EZ | $882.64 |
| 1318EZ550Z | 13.5" × .187" × EZ | $1,156.11 |
| 1325EZ550Z | 13.5" × .250" × EZ | $1,473.33 |
| 1412EZ550Z | 14" × .125" × EZ | $882.64 |
| 1425EZ550Z | 14" × .250" × EZ | $1,473.33 |
Zenesis™ Extreme Green Concrete Blade
- Extra-tall 12mm diamond segment height provides maximum service life for large-scale logistics and warehouse flooring contracts.
- Features deep drop-segment undercut protection to prevent blade breakdown in extremely abrasive cutting zones.
- Engineered with pattern-placed diamond crystals for 100% predictable cut performance across every blade produced.
| Part Number | Size (Diameter x Kerf x Arbor) | List Price (USD) |
|---|---|---|
| 0609KDGZX4 | 6" × .095" × 1" | $303.51 |
| 0809CDGZX4 | 8" × .095" × 7/8" | $513.26 |
| 1009CDGZX4 | 10" × .095" × 7/8" | $744.20 |
| 1212KDGZX4 | 12" × .125" × 1" | $1,027.60 |
| 1312KDGZX4 | 13.5" × .125" × 1" | $1,213.38 |
| 1412KDGZX4 | 14" × .125" × 1" | $1,234.48 |
Zenesis™ V-Series Diamond Blade
- Features a distinctive V-notch segment geometry that accelerates initial blade bite and reduces surface contact friction.
- Hybrid Layering Technology maximizes exposed cutting diamonds for up to 30% faster cut speeds.
- Ideal for early cured concrete slabs, masonry joints, and utility expansion cuts where high feed rates are needed.
| Part Number | Size (Diameter x Kerf x Arbor) | List Price (USD) |
|---|---|---|
| 0809UDUZX5-2V | 8" × .095" × U/A | $250.81 |
| 1009UDUZX5-2V | 10" × .095" × U/A | $385.37 |
X300 Premium Early Entry Blade
- High-concentration premium synthetic diamonds suited for heavy-duty slab sawing and rental fleet distribution.
- Comprehensive arbor variants enable compatibility with walk-behind saws, early-entry machines, and high-speed hand-held power cutters.
- Laser-welded segments ensure operator safety and high resistance to segment stripping under abrasive slurry conditions.
| Part Number | Size (Diameter x Kerf x Arbor) | List Price (USD) |
|---|---|---|
| 0508EZGX3 | 5" × .080" × EZ | $254.79 |
| 0508ADGX3 | 5" × .080" × 5/8" | $254.79 |
| 0609EZGX3 | 6" × .095" × EZ | $286.00 |
| 0609ADGX3 | 6" × .095" × 5/8" | $286.00 |
| 0609CDGX3 | 6" × .095" × 7/8"-5/8" | $286.00 |
| 6509EZGX3 | 6.5" × .095" × EZ | $373.13 |
| 0709ADGX3 | 7" × .095" × 5/8" | $436.80 |
| 0709UDGX3 | 7" × .095" × U/A | $436.80 |
| 0809EZGX3 | 8" × .095" × EZ | $482.30 |
| 0809ADGX3 | 8" × .095" × 5/8" | $482.30 |
| 0809CDGX3 | 8" × .095" × 7/8" | $482.30 |
| 0825EZGX3 | 8" × .250" × EZ | $599.47 |
| 0909ADGX3 | 9" × .095" × 5/8" | $579.74 |
| 0909CDGX3 | 9" × .095" × 7/8"-5/8" | $579.74 |
| 1009EZGX3 | 10" × .095" × EZ | $657.77 |
| 1009ADGX3 | 10" × .095" × 5/8" | $657.77 |
| 1009EDGX3 | 10" × .095" × 1"/20mm | $657.77 |
| 1025EZGX3 | 10" × .250" × EZ | $1,226.06 |
| 1212EZGX3 | 12" × .125" × EZ | $786.27 |
| 1225EZGX3 | 12" × .250" × EZ | $1,540.29 |
| 1312EZGX3 | 13.5" × .125" × EZ | $981.10 |
| 1325EZGX3 | 13.5" × .250" × EZ | $1,653.42 |
| 1412EZGX3 | 14" × .125" × EZ | $1,003.08 |
| 1425EZGX3 | 14" × .250" × EZ | $1,697.52 |
Precision Skid Plates & Accessories
- Crucial component in early entry dry cutting: holds slab aggregate firmly in place as up-cutting diamond segments exit the kerf.
- Precision CNC-machined slots prevent joint chipping, surface blowout, and edge raveling.
- Always replace the skid plate alongside each new blade to guarantee tight slot tolerances and professional joint appearance.
| Part Number | Blade Diameter Compatibility | List Price |
|---|---|---|
| EZPL68C | Skid Plate with Clip for 6" & 8" Blades | Inquire for Pricing |
| EZPL10C | Skid Plate with Clip for 10" Blades | Inquire for Pricing |
| EZPL1213C | Skid Plate with Clip for 12" & 13.5" Blades | Inquire for Pricing |
| EZPL14C | Skid Plate with Clip for 14" Blades | Inquire for Pricing |
| Part Number | Saw Model / Specification | List Price |
|---|---|---|
| DV-GCT-8-54-R2 | 8" Skid Plate for Gorilla 8EE and GS100 (0.090", Pinless) | Inquire for Pricing |
| DV-GCT-GS300-81-SP | 10" Skid Plate for Gorilla GS300 (0.090", Pinless) | Inquire for Pricing |
| DV-GCT-GS700-70 | 14" Skid Plate for Gorilla GS700 (Pinless) | Inquire for Pricing |
| Part Number | Description / Thickness | List Price |
|---|---|---|
| EZPL68 | Standard Skid Plate for 6" & 8" Blades | Inquire for Pricing |
| EZPL10 | Standard Skid Plate for 10" Blades | Inquire for Pricing |
| EZPL1213 | Standard Skid Plate for 12" & 13.5" Blades | Inquire for Pricing |
| EZPL14 | Standard Skid Plate for 14" Blades | Inquire for Pricing |
| EZPL6825 | Skid Plate for 6" & 8" Blades (.250" Extra Thick) | Inquire for Pricing |
| EZPL1025 | Skid Plate for 10" Blades (.250" Extra Thick) | Inquire for Pricing |
| EZPL1213-25 | Skid Plate for 12" & 13.5" Blades (.250" Extra Thick) | Inquire for Pricing |
| EZPL14-25 | Skid Plate for 14" Blades (.250" Extra Thick) | Inquire for Pricing |
| EZPL68F | Fixed Pin Style Skid Plate for 6" & 8" Blades | Inquire for Pricing |
| EZPL10F | Fixed Pin Style Skid Plate for 10" Blades | Inquire for Pricing |
| EZPL1213F | Fixed Pin Style Skid Plate for 12" & 13.5" Blades | Inquire for Pricing |
| EZPL14F | Fixed Pin Style Skid Plate for 14" Blades | Inquire for Pricing |
| EZPL6825F | Fixed Pin Style Skid Plate for 6" & 8" (.250" Thick) | Inquire for Pricing |
| EZPL1025F | Fixed Pin Style Skid Plate for 10" (.250" Thick) | Inquire for Pricing |
| EZPL1213-25F | Fixed Pin Style Skid Plate for 12" & 13.5" (.250" Thick) | Inquire for Pricing |
| EZPL14-25F | Fixed Pin Style Skid Plate for 14" (.250" Thick) | Inquire for Pricing |
| EZPL-PIN | Replacement Skid Plate Alignment Pin Assembly | Inquire for Pricing |
B2B Manufacturing Quality & OEM Capability
For more than two decades, Diamond Vantage has manufactured 100% of its early entry saw blades and surface tooling in self-owned automated production facilities. By synthesizing high-temperature cobalt-iron alloys and employing laser-welding automation, we offer distributors, equipment manufacturers, and large concrete contractors unmatched consistency from batch to batch.
Laser-Welded Integrity
100% laser weld testing prevents segment detachment even under elevated friction during early dry cutting.
OEM & Private Label
Custom laser etching, blade colors, packaging, and specific arbor machining tailored to equipment brands.
Dual Distribution Hubs
Extensive inventory in California and Georgia guarantees same-day or next-day shipping to jobsites and warehouses nationwide.
Early Entry Cutting FAQ
Field-tested recommendations from our product application engineers to help contractors prevent joint raveling and optimize footage.
When should early entry cutting take place?
Early entry cutting must take place in the early hydration window—typically within 1 to 4 hours after final concrete floating and troweling. Cutting before the concrete can bear weight causes surface damage; waiting too long allows internal tensile forces to generate random stress cracks before joints are established.
Why is a fresh skid plate required with each blade change?
The skid plate acts as a pressure foot, holding aggregate down against the slab while the up-cutting blade breaks through the surface. Over the life of a blade, the skid plate slot widens due to abrasive slurry. Reusing a widened skid plate removes this structural support, resulting in joint spalling and edge raveling.
How do I avoid premature blade wear in green concrete?
Premature wear is almost always caused by using a bond that is too soft for abrasive sandy aggregates. If the concrete has a high sand content or soft limestone aggregate, switch to the Z550 Yellow formulation, which features a harder bond matrix designed to withstand abrasive green slurry.
Are these blades suitable for Soff-Cut® early entry saws?
Yes. All of our EZ-series green concrete blades incorporate the patented triangular arbor configuration engineered specifically for standard early entry saw models, accompanied by matched clip-on and fixed-pin skid plates.