Home / Products / High Speed / Masonry & Low HP Flat Saw

Direct Manufacturer Engineering & Global Supply

Engineered for high-volume distributors, rental fleets, and concrete cutting contractors, Diamond Vantage high-speed and low-horsepower flat saw blades deliver reliable cutting speed, long service life, and segment retention under high-stress conditions. By formulating matrices in-house to match aggregate hardness and machine RPM, we prevent segment glazing on low-horsepower engines and maximize abrasive wear resistance.

100% In-House Laser Welded
OEM & Private Label Programs
Standard 1" & 20mm Arbors w/ PH
Direct Inventory from CA & GA

Hard Materials Blades

Granite • Hard Brick • Refractory • Hard Concrete
Supreme Grade X400 Vortex Diamond Blade for Hard Materials

X400 Vortex

Hard Materials • Turbo Rim
  • 9mm (.354") tall rim designed for extended cutting life in dense stone and refractory.
  • Proprietary vortex turbo rim pattern ejects cutting dust quickly to keep temperatures low.
  • Smooth, chip-free performance in high-speed handheld power cutters and table saws.
Recommended Applications: Granite, Marble, Hard Vitrified Brick, Engineered Paver, Hard Clay Tile
View Part Numbers & Dimensions
Part NumberDiameter × Width × ArborSegment Spec
1212BDVUX4-112" × .125" × 20mm9mm Vortex Rim
1212BEDVUX4-112" × .125" × 1"-20mm w/ Pin Hole9mm Vortex Rim
1412BDVUX4-114" × .125" × 20mm9mm Vortex Rim
1412BEDVUX4-114" × .125" × 1"-20mm w/ Pin Hole9mm Vortex Rim
Supreme Grade X400 Refractory Diamond Saw Blade

X400 Refractory

Refractory & Firebrick • Segmented
  • 10mm (.394") heavy-duty laser-welded diamond segments.
  • Tuned matrix bond prevents segment stripping when cutting dense acidic refractory materials.
  • Suitable for gas cut-off saws, masonry table saws, and walk-behind saws up to 13HP.
Recommended Applications: Refractory Brick, Hard Firebrick, Kiln Liners, Acid-Resistant Tile, Hard Concrete
View Part Numbers & Dimensions
Part NumberDiameter × Width × ArborSegment Spec
1211EX4-1E12" × .110" × 1"-20mm10mm Segment
1212EX4-1E12" × .125" × 1"-20mm10mm Segment
1411EX4-1E14" × .110" × 1"-20mm10mm Segment
1412EX4-1E14" × .125" × 1"-20mm10mm Segment
1612EX4-1E16" × .125" × 1"-20mm10mm Segment
1812EX4-1E18" × .125" × 1"10mm Segment
2012EX4-1E20" × .125" × 1"10mm Segment
2415EX4-1E24" × .155" × 1"10mm Segment
Premium Grade X301 Turbo Diamond Blade

X301 Turbo

Hard Concrete & Rebar • Water Drop Slot
  • 12mm (.472") tall segment delivers elevated tool longevity on reinforced masonry slabs.
  • Engineered water drop gullets improve slurry removal and maintain high steel core tension.
  • Serrated turbo segment faces allow rapid bite into river rock aggregate.
Recommended Applications: Hard Concrete, Heavily Reinforced Slabs, Hard Pavers, Concrete Pipe, Terrazzo
View Part Numbers & Dimensions
Part NumberDiameter × Width × ArborSegment Spec
1212EZX3-1T12" × .125" × 1"-20mm12mm Turbo Segment
1412EZX3-1T14" × .125" × 1"-20mm12mm Turbo Segment
1612EZX3-1T16" × .125" × 1"-20mm12mm Turbo Segment
1812EZX3-1T18" × .125" × 1"12mm Turbo Segment
2014EZX3-1T20" × .140" × 1"12mm Turbo Segment
2415EZX3-1T24" × .155" × 1"12mm Turbo Segment
Value Grade X101 Turbo Diamond Blade

X101 Turbo

Hard Concrete • Keyhole Slot
  • 12mm (.472") segment height balances economical acquisition cost with extended service life.
  • Alternating turbo segments facilitate low-vibration cutting with portable handheld saws.
  • Proven bond for commercial rental centers and general construction fleets.
Recommended Applications: Hard Cured Concrete, Precast Slabs, Concrete Pipe, Hard Paver Bricks
View Part Numbers & Dimensions
Part NumberDiameter × Width × ArborSegment Spec
1212ELZX1-112" × .125" × 1"-20mm12mm Segment
1412ELZX1-114" × .125" × 1"-20mm12mm Segment
1612ELZX1-116" × .125" × 1"-20mm12mm Segment
1812ELZX1-118" × .125" × 1"12mm Segment

General Purpose Blades

Reinforced Concrete • Masonry • Block • Precast
ZENESIS™ Grade ZENESIS V-Series Patterned Diamond Blade

ZENESIS™ V-Series

Patterned Diamond Array • Maximum Speed
  • Patented patterned diamond placement technology maximizes diamond exposure and active cutting faces.
  • Extra-tall 15mm (.590") segment height ensures unmatched longevity and lower cost per cut.
  • Unique V-notch segment geometry boosts cutting speed through heavy steel rebar.
Recommended Applications: Heavily Reinforced Cured Concrete, Structural Masonry, Precast Beams, Hard Brick
View Part Numbers & Dimensions
Part NumberDiameter × Width × ArborSegment Spec
1212BEDUZX5-2V12" × .125" × 1"-20mm15mm V-Notch Segment
1412BEDUZX5-2V14" × .125" × 1"-20mm15mm V-Notch Segment
1612BEDUZX5-2V16" × .125" × 1"-20mm15mm V-Notch Segment
1812EDUZX5-2V18" × .125" × 1"15mm V-Notch Segment
2012EDUZX5-2V20" × .125" × 1"15mm V-Notch Segment
2412EDUZX5-2V24" × .125" × 1"15mm V-Notch Segment
Premium Grade NEW 2026 Vantage Force Diamond Saw Blade

Vantage Force

Slanted T-Slot • Heat Dissipation Core
  • 12mm (.472") segment height with advanced synthetic diamond grit concentration.
  • High-tensile heat-treated core engineered with slanted T-slots for optimum debris removal and cooling.
  • Fast cutting behavior on handheld saws, masonry table saws, and walk-behind saws.
Recommended Applications: Cured Concrete, Structural Masonry, Solid Block, Common Brick
View Part Numbers & Dimensions
Part NumberDiameter × Width × ArborSegment Spec
1212EVF12" × .125" × 1"-20mm w/ Pin Hole12mm Slanted T-Slot
1412EVF14" × .125" × 1"-20mm w/ Pin Hole12mm Slanted T-Slot
1612EVF16" × .125" × 1"-20mm w/ Pin Hole12mm Slanted T-Slot
Premium Grade X350 General Purpose Diamond Saw Blade

X350 General Purpose

Slanted Keyhole • Broad Width Range
  • 12mm (.472") segment height engineered for broad versatility across jobsite materials.
  • Wide choice of cutting thicknesses from .110" thin kerf up to .500" for joint widening and loop sawing.
  • Slanted keyholes protect against segment undercut in mixed abrasive aggregate conditions.
Recommended Applications: Reinforced Concrete, Common Brick, Hollow Concrete Block, Pavement Slabs
View Part Numbers & Dimensions
Part NumberDiameter × Width × ArborSegment Spec
1212EX3.5-212" × .125" × 1"-20mm12mm Segment
1412EX3.5-214" × .125" × 1"-20mm12mm Segment
1425EX3.5-214" × .250" × 1"12mm Segment
1612EX3.5-216" × .125" × 1"-20mm12mm Segment
1812EX3.5-218" × .125" × 1"12mm Segment
2014EX3.5-220" × .140" × 1"12mm Segment
2415EX3.5-224" × .155" × 1"12mm Segment
Quality Grade Y110 General Purpose Diamond Blade

Y110 General Purpose

Standard Contractor Workhorse
  • 12mm (.472") segment height with balanced matrix hardness for dependable daily cutting.
  • High tensile steel core guarantees clean, straight cuts without deflection under handheld operation.
  • Laser welded for wet and dry jobsite cutting applications.
Recommended Applications: General Masonry, Cured Concrete, CMU Blocks, Brick Pavers
View Part Numbers & Dimensions
Part NumberDiameter × Width × ArborSegment Spec
1212EY1-212" × .125" × 1"-20mm12mm Laser Welded
1412EY1-214" × .125" × 1"-20mm12mm Laser Welded
1612EY1-216" × .125" × 1"-20mm12mm Laser Welded
1812EY1-218" × .125" × 1"12mm Laser Welded
2014EY1-220" × .140" × 1"12mm Laser Welded

Abrasive Materials Blades

Concrete Block • Sandstone • Limestone • Low HP Saws
Premium Grade X300 Abrasive Diamond Saw Blade

X300 Abrasives

Hard Matrix • Slurry Flush Gullets
  • 12mm (.472") segment height with ultra-hard wear-resistant metal bond.
  • Engineered specifically to resist premature bond erosion caused by sharp, abrasive silica slurry.
  • Water drop gullet design accelerates slurry evacuation to safeguard blade core integrity.
Recommended Applications: Concrete Block, Lightweight CMU, Sandstone, Limestone, Abrasive Slabs
View Part Numbers & Dimensions
Part NumberDiameter × Width × ArborSegment Spec
1212EX3-312" × .125" × 1"12mm Hard Bond
1412EX3-314" × .125" × 1"12mm Hard Bond
1612EX3-316" × .125" × 1"12mm Hard Bond
1812EX3-318" × .125" × 1"12mm Hard Bond
2012EX3-320" × .125" × 1"12mm Hard Bond
2415EX3-324" × .155" × 1"12mm Hard Bond
Quality Grade Y100 Abrasive Diamond Blade

Y100 Abrasives

Optimized for 5HP - 13HP Walk-Behind Saws
  • 10mm (.394") segment height tuned for smaller walk-behind saws and masonry table equipment.
  • Prevents engine bog-down while holding edge retention against rough, sandy aggregates.
  • Dual arbor compatibility (1" and 20mm with drive pinhole) for instant jobsite deployment.
Recommended Applications: Abrasive Green Concrete, Soft Aggregates, Cinder Block, Mortar Slabs
View Part Numbers & Dimensions
Part NumberDiameter × Width × ArborSegment Spec
1212EY2-312" × .125" × 1"-20mm10mm Segment
1412EY2-314" × .125" × 1"-20mm10mm Segment

Asphalt Cutting Blades

Asphalt Overlay • Road Demolition • Undercut Protection
Supreme Grade X400 Asphalt Diamond Saw Blade

X400 Asphalt

Deep Wedge Undercut Protection • Heavy Duty
  • 10mm (.394") tall laser-welded segments infused with high-tenacity industrial diamond grit.
  • Recessed drop segments and carbide wedge segments prevent catastrophic core undercut wear.
  • Exceptional life on gas cut-off saws and small 8HP-13HP push saws cutting blacktop and road surfaces.
Recommended Applications: Blacktop Asphalt, Asphalt over Concrete, Ultra-Abrasive Green Slabs
View Part Numbers & Dimensions
Part NumberDiameter × Width × ArborSegment Spec
1212EX4-412" × .125" × 1"-20mm10mm Undercut Protected
1412EX4-414" × .125" × 1"-20mm10mm Undercut Protected
1612EX4-416" × .125" × 1"-20mm10mm Undercut Protected
1812EX4-418" × .125" × 1"10mm Undercut Protected
2012EX4-420" × .125" × 1"10mm Undercut Protected
Quality Grade Y110 Asphalt Diamond Saw Blade

Y110 Asphalt

Deep U-Slot Segment Protection
  • 12mm (.472") segment height engineered for paving contractors and municipal road repairs.
  • Wide U-slots combined with deeper drop-down segments prevent core undercut and overheating.
  • Laser welded construction for maximum strength and operator safety under dry or wet cutting.
Recommended Applications: Hot Mix Asphalt, Green Concrete with Hard River Gravel
View Part Numbers & Dimensions
Part NumberDiameter × Width × ArborSegment Spec
1212EY2-4T12" × .125" × 1"-20mm12mm Segment
1412EY2-4T14" × .125" × 1"-20mm12mm Segment
1612EY2-4T16" × .125" × 1"-20mm12mm Segment
1812EY2-4T18" × .125" × 1"12mm Segment

All Purpose & Combo Cutting Blades

Concrete • Asphalt • Brick • Multi-Material
ZENESIS™ Grade NEW 2026 ZENESIS AP3 All Purpose Diamond Saw Blade

ZENESIS™ AP3

Patterned Diamond Multi-Material Combo
  • 14mm (.551") segment height powered by proprietary patterned diamond positioning.
  • Engineered combo bond seamlessly cuts both cured reinforced concrete and abrasive asphalt.
  • Reinforced drop segments safeguard against undercut when transitioning from concrete to asphalt.
Recommended Applications: Asphalt-over-Concrete Overlays, Cured Concrete, Masonry Block, Abrasive Stone
View Part Numbers & Dimensions
Part NumberDiameter × Width × ArborSegment Spec
12BEDUZX4-AP312" × .125" × 20mm14mm Patterned Drop Segment
1412BEDUZX4-AP314" × .125" × 20mm14mm Patterned Drop Segment
1612BEDUZX4-AP316" × .125" × 1"-20mm14mm Patterned Drop Segment
1814EDUZX4-AP318" × .140" × 1"-20mm14mm Patterned Drop Segment
2014EDUZX4-AP320" × .140" × 1"-20mm14mm Patterned Drop Segment
2414EDUZX4-AP324" × .140" × 1"-20mm14mm Patterned Drop Segment
Value Grade NEW 2026 Vantage Edge Diamond Blade

Vantage Edge

Dual Height Undercut Protection
  • 12mm (.472") standard segments paired with 4 deep undercut segments standing 15mm (.591") tall.
  • Slanted T-slot core provides cooling and dust ejection under aggressive handheld cutting.
  • Unrivaled cost-efficiency for utility contractors, general builders, and equipment rental depots.
Recommended Applications: Asphalt, Reinforced Concrete, Building Brick, CMU Block, Green Slabs
View Part Numbers & Dimensions
Part NumberDiameter × Width × ArborSegment Spec
1212EDV-EDGE12" × .125" × 1"-20mm12mm / 15mm Deep UCR
1412EDV-EDGE14" × .125" × 1"-20mm12mm / 15mm Deep UCR
1612EDV-EDGE16" × .125" × 1"-20mm12mm / 15mm Deep UCR
1812EDV-EDGE18" × .125" × 1"-20mm12mm / 15mm Deep UCR

Metal & Ductile Iron Blades

Ductile Iron Pipe • Structural Steel • Emergency Rescue
Supreme Grade X400 Ductile Iron Diamond Saw Blade

X400 Ductile Iron

Vacuum Electroplated & Sintered Turbo
  • 4mm (.157") continuous-rim turbo segment designed exclusively for ductile iron pipe and water mains.
  • High-concentration diamond matrix eliminates wheel pinch and eliminates toxic wheel dust odors.
  • Maintains cutting diameter throughout blade life, outlasting hundreds of conventional bonded abrasive wheels.
Recommended Applications: Municipal Water Mains, Ductile Iron Pipe, Cast Iron, Reinforced Concrete Encasements
View Part Numbers & Dimensions
Part NumberDiameter × Width × ArborSegment Spec
1212BEDDIX4-412" × .125" × 1"-20mm4mm Turbo Rim
1411BEDDIX4-414" × .110" × 1"-20mm4mm Turbo Rim
1412BEDDIX4-414" × .125" × 1"-20mm4mm Turbo Rim
1612BEDDIX4-416" × .125" × 1"-20mm4mm Turbo Rim
Heavy Duty Grade X200-AC All-Cut Diamond Blade

X200-AC All-Cut Rescue

Multi-Material Vacuum Brazed
  • 5mm (.196") vacuum brazed diamond segments with precision cooling holes.
  • High-strength bond withstands high RPMs cutting steel beams, metal studs, and rebar without shattering.
  • Essential gear for emergency fire and rescue squads, demolition specialists, and steel fabricators.
Recommended Applications: Structural Steel, Rebar, Ductile Iron, PVC Pipe, Reinforced Concrete
View Part Numbers & Dimensions
Part NumberDiameter × Width × ArborSegment Spec
0712UDUX2-AC27" × .125" × Universal Arbor5mm Brazed
1214BEDUX2-AC212" × .142" × 1"-20mm5mm Brazed
1414BEDUX2-AC214" × .142" × 1"-20mm5mm Brazed
1614BEDUX2-AC216" × .145" × 1"-20mm5mm Brazed
2015EDUX2-AC220" × .155" × 1"5mm Brazed

Technical Selection Guide: Saws & Blade Matrix Matching

1. Handheld Cut-Off Saws

Gas-powered handheld saws run between 4,500 and 5,400 RPM. Always ensure blade diameter matches the guard capacity (12", 14", or 16") with 20mm or 1" bushings.

2. Masonry Table Saws

Fixed table saws require true running cores to prevent edge chipping on finished brick and stone. Continuous or tight turbo segments provide smooth cuts on pavers.

3. Low HP Walk-Behind Saws

For push saws between 5HP and 13HP, softer to medium bonds ensure adequate self-sharpening diamond turnover without requiring high engine torque.

Source Direct from a True Diamond Tool Manufacturer

Request container wholesale pricing, customized bond formulations, OEM laser marking, and complete technical specifications from our engineering department.

Inquire Now