Direct Manufacturer Engineering High-Production Surface Preparation & Floor Profiling
From rapid thick epoxy stripping to scratch-free transition honing, Diamond Vantage manufactures precision diamond tooling engineered to meet International Concrete Repair Institute (ICRI) Concrete Surface Profile (CSP) standards from CSP 1 through CSP 6.
Coating & Mastic Removal PCD Scraping Tooling
Engineered with polycrystalline diamond wafers to slice elastomeric membranes, thick epoxy coatings, and carpet glues without melting or loading up.
CSP 4 – CSP 6 Profile Floor Flattening & Edging Segmented Diamond Cups
Directional S-cup, arrow, and T-segment layouts maximize downforce and air flow, providing aggressive stock removal and rapid leveling on concrete slabs.
CSP 2 – CSP 3 Profile Honing & High-Gloss Finishing Ceramic & Resin Transitions
Eliminate scratch gouges along perimeter walls with Fast Edge ceramic wheels, followed by high-density resin diamond pads up to 5000 grit.
CSP 1 / High Gloss 80+
Heavy-Duty Diamond Cup Wheels
Grinder & Edger Tooling Supreme Grade 
Features a heavy 10mm segment profile contoured in an S-shape to clear debris continuously while delivering uniform, swirl-free concrete removal. Precision-engineered extraction vents maintain lower thermal loads during high-production hand grinding.
- Segment Height: 10mm (.394")
- Hub Specification: L=13.5mm / LL=17mm (5/8"-11 Thread or 7/8" Bore)
- Available Grit Range: 16/18, 30/40, 60/80, 120/140
- Aggressive initial leveling before resin polishing stages
| Part Number | Diameter & Arbor | Grit Rating | Hub Configuration |
|---|
| 05HSZX3-1618L | 5" (125mm) x 5/8"-11 | 16/18 Extra Coarse | 13.5mm Threaded Hub |
| 05HSZX3-3040L | 5" (125mm) x 5/8"-11 | 30/40 Coarse | 13.5mm Threaded Hub |
| 05HSZX3-6080L | 5" (125mm) x 5/8"-11 | 60/80 Medium | 13.5mm Threaded Hub |
| 07HSZX3-1618LL | 7" (180mm) x 5/8"-11 | 16/18 Extra Coarse | 17mm Tall Hub |
| 07HSZX3-3040LL | 7" (180mm) x 5/8"-11 | 30/40 Coarse | 17mm Tall Hub |
| 07HSZX3-6080LL | 7" (180mm) x 5/8"-11 | 60/80 Medium | 17mm Tall Hub |
Premium Grade 
Interlocking T-shaped diamond segments optimize cutting velocity while shielding the steel core against undercut erosion in high-abrasion applications. Ideal for joint smoothing, high-spot elimination, and general site leveling.
- Segment Height: 5mm (.196")
- Mounting: 5/8"-11 Threaded or 7/8"-5/8" Dual Bushing
- Diameters: 4", 4.5", 5", and 7"
- Free-cutting matrix avoids glazing on cured concrete slabs
| Part Number | Diameter | Arbor Mount | Application Focus |
|---|
| 45HDTC | 4.5" (115mm) | 5/8"-11 Threaded | Angle Grinder High Spot Leveling |
| 05HDTC | 5" (125mm) | 5/8"-11 Threaded | Standard Surface Prep & Edging |
| 07HDTC | 7" (180mm) | 5/8"-11 Threaded | Heavy Industrial Slab Grinding |
Premium Grade 
Directional arrow segments create sharp leading shearing edges designed to cut through thin adhesives, curing compounds, and sealers while simultaneously profiling the concrete underneath in a single pass.
- Segment Height: 7mm (.275")
- Segment Count: 8-segment (4.5" / 5") and 10-segment (7")
- Mounting Options: 5/8"-11 Hub or 7/8"-5/8" Arbor
- High diamond concentration minimizes operator fatigue
| Part Number | Diameter & Fitting | Segment Count | Function |
|---|
| 45HARX3 | 4.5" x 5/8"-11 | 8 Segments | Glue/Mastic Removal & Leveling |
| 05HARX3 | 5" x 5/8"-11 | 8 Segments | Commercial Floor Edging |
| 07HARX3 | 7" x 5/8"-11 | 10 Segments | High-Speed Stock & Paint Removal |
Standard / Value Grade 
Economical workhorse cup wheels for construction contractors and tool rental fleets. Engineered with durable 5mm sintered segments suited for brick, mortar, masonry, and general slab cleaning.
- Configurations: Single Row (aggressive stock removal), Double Row (smooth finish)
- Turbo Fan Variant: L-shaped fins force air movement to clear dusty aggregate swarf
- Diameters: 4", 4.5", 5", and 7" in both threaded 5/8"-11 and bored centers
- Stable steel base plates dynamically balanced for low vibration
| Series | Type | Segment Heights | Target Substrates |
|---|
| X100 Single Row | 8 to 12 Segments | 5mm (.196") | Fast aggressive concrete & masonry removal |
| X100 Double Row | 16 to 24 Segments | 5mm (.196") | Smooth, chatter-free finishing passes |
| X100 Turbo Fan | L-Shape Directional | 5mm (.196") | High-heat dispersing, dust extraction aid |
PCD Scrapers & Ceramic Edge Wheels
Coatings & Scratch-Free Edging Industrial PCD 
Equipped with solid polycrystalline diamond inserts that mechanically peel coatings from concrete without generating frictional heat that melts adhesives. Features protective sacrificial segments to regulate scraping depth and protect concrete cores.
- X300 Series: Extra-large PCD inserts with protective backup segments
- X200 / X100 Series: Small PCD elements for fast paint stripping and thin glues
- Connections: 5/8"-11 threaded arbor for direct angle grinder mounting
- Sizes: 4", 4.5", 5", 6", and 7"
| Part Number | Diameter & Fitting | PCD Grade | Ideal Substrate Coating |
|---|
| 05HPCD2P | 5" x 5/8"-11 | Large PCD + Sacrificial Seg | Thick elastomeric, heavy epoxy slurries |
| 07HPCD2P | 7" x 5/8"-11 | Large PCD + Sacrificial Seg | Commercial warehouse mastic stripping |
| 45HPCD3 | 4.5" x 5/8"-11 | Heavy Duty Small PCD | Epoxy floor paints and thin sealers |
| 07HPCD3 | 7" x 5/8"-11 | Heavy Duty Small PCD | High-speed urethane topcoat scraping |
Fast Edge System 
A technological breakthrough replacing metal bond cup wheels for edge processing. The specialized ceramic matrix glides along wall lines without gouging or causing deep ring scratches, cutting edge-polishing labor by up to 50%.
- 5" Wheel: 5/8"-11 Thread with 13.5mm compact hub height
- 7" Wheel: 5/8"-11 Thread with 27.9mm tall hub for dust shroud clearance
- Grit Selection: 30, 50, 100, 200, 400
- Lightweight structure reduces hand arm vibration syndrome (HAVS)
| 5" Part Number | 7" Part Number | Grit Size | Application Stage |
|---|
| FG-05HCW-30 | FG-07HCW-30 | 30 Grit | Initial Edge Planing (replaces 30# metal cup) |
| FG-05HCW-50 | FG-07HCW-50 | 50 Grit | Primary Scratch Scratch Refining |
| FG-05HCW-100 | FG-07HCW-100 | 100 Grit | Intermediate Honing Transition |
| FG-05HCW-200 | FG-07HCW-200 | 200 Grit | Fine Edge Pre-Polish Refining |
| FG-05HCW-400 | FG-07HCW-400 | 400 Grit | Final Edge Satin Preparation |
Walk-Behind Grinder Heads & Blocks
Double Disc & Rotary Systems Machine Heads 
Direct-bolt 10-inch rotary diamond grinding plates engineered with universal bolt hole layouts compatible with heavy walk-behind floor machines. Available in 10-segment, 20-segment, and continuous turbo configurations matched to slab compressive strengths.
- Mounting: Standard industry bolt circle (5/8" center hole + bolt pattern)
- Bond Selections: Medium Bond (normal concrete) / Hard Bond (abrasive sand slabs)
- Grinding Blocks: 2" x 2" x 4" wedge blocks for slide-on multi-head systems
- High segment volume guarantees predictable wear rates across large square footage
| Part Number | Size / Type | Segment Layout | Bond Matrix |
|---|
| DVCCM1001 | 10" Plate | 10 Segments | Medium Bond (Standard Concrete) |
| DVCCM1002 | 10" Plate | 10 Segments | Hard Bond (Abrasive Slab) |
| DVCCM2001 | 10" Plate | 20 Segments | Medium Bond (Maximum Flatness) |
| DVCCM2009 | 10" Plate | 20 Turbo Segments | Medium Bond (High Production Speed) |
| GB224-2 | 2" x 2" x 4" Block | Solid Wedge Block | Medium Bond (Concrete Floors) |
Concrete Polishing & Scratch Refining
F.A.S.T., Hybrids & Burnishing Proprietary F.A.S.T. 
The patented Flexible Angle Segment Technology (F.A.S.T.) system allows field operators to calibrate segment attack angles to optimize either cutting speed or scratch smoothness. Combined with hybrid metal-resin pucks and high-speed burnishing pads for comprehensive slab finishing.
- Color-Coded Bonds: Yellow (Very Hard), Blue (Hard), Red (Medium), Black (Soft)
- Grits: 16/18, 30/40, 60/80, 120/150 plus quick-change PCD scraper inserts
- Hybrid Metallic Pads: 3" metal-resin formulation to erase transitional scratch patterns
- Floor Buffer Systems: Wing pads & high-speed burnishing pads from 17" to 27" up to 3000 grit
| Tooling Category | Dimensions | Grit Range | Operational Function |
|---|
| F.A.S.T. Segments | Universal Quick-Slide | 16/18 to 120/150 | Color-coded bond concrete profiling |
| Hybrid Metallic Pads | 3" Diameter | 30, 50, 100, 200, 400 | Metal-to-resin scratch elimination |
| Resin Polishing Pads | 3" Wet / Dry White | 50 to 3000 Grit | Final high-clarity concrete gloss |
| Dual Purpose Discs | 7", 9", 11" Discs | 50 to 3000 Grit | Large-area floor machine polishing |
| Burnishing Pads | 17" to 27" Buffers | 400 to 3000 Grit | High-speed gloss maintenance (80+ GU) |
Stone & Hardscape Polishing Systems
Granite, Quartzite, Porcelain & Pool Plaster ZENESIS Ceramic 
Advanced ceramic bond matrix provides extreme disc flexibility for bullnose, ogee, and tight profiles without chipping brittle materials. Specially formulated white resins prevent color bleed on white marble and quartz countertops.
- ZENESIS™ Z-Flex Ceramic: Grits 30 to 5000 for intricate edge shaping
- ZENESIS™ 3-Step System: Achieves factory luster in three passes (#1, #2, #3 + Pos 0)
- Resin Matrix Hardscape Discs: 7" non-bleeding pads for pool plaster and copings
- Electroplated Sanding Discs: 5", 7", 9" raw diamond foil discs for marble and concrete tops
| Series | Pad Diameter | Backing / Mounting | Key Benefit |
|---|
| ZENESIS™ Z-Flex | 4" (100mm) | Color-Coded Flexible Hook-and-Loop | Zero edge cracking on ogee & tight curves |
| ZENESIS™ 3-Step | 4" (100mm) | Reinforced Velcro Backing | 50% labor reduction vs traditional 7-step |
| White Resin Pads | 4" (100mm) | Non-Staining White Resin | Zero resin burn or bleed on quartzite |
| Resin Matrix Pool Discs | 7" (180mm) | Heavy Duty Velcro Backing | No dye transfer on wet pool marcite finishes |
| Electroplated Diamond | 5", 7", 9" Discs | Full Face Diamond Sanding | Aggressive shaping on pool interiors & marble |
Technical Advisory Surface Preparation Technical FAQ
Field engineering answers regarding concrete scratch progression, coating removal speed, and bond selection.
Q: When should operators switch from metal bond tooling to ceramic or resin tooling?
Metal bond cup wheels and segments create significant sub-surface fracture lines. Transitioning occurs between 50 and 100 grit: running ceramic wheels (such as Fast Edge) or hybrid metallic pucks at this juncture removes deep gouges quickly without generating excessive heat, ensuring resin pads at 200–800 grit polish the actual matrix rather than trapping scratch marks beneath the surface.
Q: Why do diamond cup wheels glaze on certain hard troweled slabs?
When the bond holding the diamond crystals is too hard relative to the aggregate, worn, rounded diamond points cannot fracture out, and no new sharp diamonds are exposed. For hard-troweled or high-silica slabs, always switch to a soft bond cup wheel or apply a small amount of fine silica sand to dress the matrix and restart the cutting action.
Q: Are dust shrouds mandatory when running PCD and diamond cup wheels dry?
Yes. Heavy PCD and diamond scraping creates airborne respirable crystalline silica that violates OSHA guidelines without containment. Diamond Vantage 5" and 7" spring-loaded brush dust shrouds maintain a continuous seal against the slab while maintaining maximum dust suction through industrial HEPA extractors.
Procure Direct from the Tool Manufacturer
Whether you require standard stock distributor supply, specialized floor fleet bulk packs, or custom OEM private-label surface preparation tooling, our engineers provide complete technical verification and rapid dispatch from our California and Georgia warehouses.
Contact Us 